Life with Style
Eldredge tie knot is not a simple tie knot with respect to its structure. It is not merely triangular shaped and has good-looking interlacing in the front. You need to be very careful when selecting the ties for making this knot. You can select plain fabrics and colors such as red, gray, pink, or brown. I am going to share few steps with you that will help you in making Eldredge tie knot on different occasions.
Eldredge Tie Knot Steps with Pictures
1- First of all place tie around neck. Be sure that wide end has touched your belt at middle.
2- Grasp tie at your neck and then make dimple.
3- Cross ends in such a way that thin end is on the top.
4- Swing thin end at the back of wide end by tightly holding these ends.
5- Now move up with thin end by bringing it through loop towards right shoulder.
6- Take thin end in the center on the front side and then move up throughout middle from within the loop.
7- Tow the thin end for tightly securing the knot.
8- Take the thin end at the back of wide end towards the left.
9- Loose the upper knot so that the thin end can be pushed through the top of loop.
10- Pull thin end so as to tight the knot.
11- Pass thin end at the back of loop.
12- Again swing up the thin end at the front and pass it throughout the center. After that, take it down towards the left.
13- Now loose the knot so as to go through the top of loop and then tight the knot.
14- Cover the thin end of tie at the back of loop.
15- Work is almost finished. Get down the corners of collar. Properly position the knot for fitting the spread of collar. Your Eldredge knot is ready now.
